|
- Shop Insulated Fan – Standard Riveted Cladding 1a
- Size 300 Model RT3012 Arrangement # 8 process
fan for 1200°F at
1800 RPM, 13” Ps at standard conditions.
Unit shown with 4” mineral wool insulation prior to cladding.
|
|
|
-
- Shop Insulated Fan – Standard Riveted Cladding 1b
- Size 300 Model RT3012 after #22Ga riveted
cladding. 316SS wheel and shaft
with a water cooled packing gland seal with insert gas purge.
Picture shows heat flinger radiation guard and shaft guard painted
OSHA yellow.
|
 |
- Shop Insulated Fan – Premium #12Ga Welded
Cladding
2
- Size 445 model BI4012 Arrangement #9 U- Belt Fan assembly on RTO system in canning industry.
Rated at 1500 RPM and 1000°F operation with 5” mineral wool insulation and #12
Ga mild steel welded cladding. For
a more rugged look and better protection from physical damage.
Note cladding is strong enough to strap down for shipping.
|
 |
- Shop Insulating Pins - Field
Insulating By Others Pre-Carburization Vent Gas Fan 3
- Size 270 Model PW Arrangement #8 insulated plug assembly for gas tight
construction with 7" insulating pines to field insulate. Rated at 3600
RPM and 1800F developing 50" Ps at 70F, .075 #/ft3.
Inco 800h wheel and shaft, 310 SS housing with Monel AMCA class C
spark proof construction and water cooled double ring packing seal with
nitrogen purge.
|
 |
- High Temperature Installation 4
- Size 540 model RB1612 Arrangement #8 Fan with 6" shop insulation and
22 Ga cladding. Rated at 1000°F
and 1800 RPM developing 54.2" Ps at 70°F,
.075 #/ft3. Casing constructed of 1/4" mild steel.
|
 |
- High Temperature
Installation 5
- 42" Diameter propeller style insulating tubeaxial arrangement #9
fan. Rated 1350 RPM and 800°F
developing 2.0" Ps at 70°F,
.075 #/ft3. Mild steel construction.
|
 |
- High Temperature
Installation 6
- MAS Replacement 54" axial design arrangement #8 horizontal plug fan
with 9" insulation. Constructed from 316 SS and A36 steel.
|
 |
- High Temperature
Installation 7
- 54" model PW high temperature axial flow plug fan built for use in
carbon industry.
-
|
 |
- High Temperature
Installation 8
- 40" Model FC Wheel for operation at 600 RPM and 1600°F.
Constructed from Inco 800 and RA 309. Water cooled double row packing gland
seal with inert gas purge and standard pillow block bearings.
|
 |
- High
Temperature Installation 9
- MAS Duplicate Replacement Wheel for a nominal 40" FC SWSI. 1600°F
high temperature construction from Inco 800H. Designed for use in steel
industry annealing application.
|
 |
- High Temperature
Installation 10
- 22" diameter model PW1221 Arrangement #2 plug fan. Rated at 3600 RPM and
2600°F
developing 4.5" Sp at operation conditions. Wheel, shaft, housing,
inlet piece, and drive plate constructed of carbon fiber. Fan plug has gas
tight, water cooled shaft seal with Nitrogen purge and special design shaft
water cooling chamber.
|
 |
- High
Temperature Installation 11
- 24" x 48" Opposed blade louvered damper designed for use in
glass industry. Constructed from 1/4" #304 SS for 1000°F
operation.
|
