- Installation 1
- Field installation of a 65" diameter BACKWARD CURVE fan, arrangement #7, with inlet box, single width single inlet (SWSI), 1800 RPM, 700°F design. The unit was supplied with a removable casing/box pie section, split inlet cone, and high-temperature aluminum paint.
- Installation 2
- Field installation of a 100-12 PB364 PRESSURE BLOWER fan, arrangement #4, A242 BACKWARD INCLINE wheel, 3550 RPM, 70°F design. The unit was supplied with an outdoor filter-silencer combination, and a customer supplied 100 Hp motor.
- Installation 3
- Field installation of a 48" diameter RADIAL BLADE scrubber exhaust fan, arrangement #8, with RADIAL INLET DAMPER, all stainless steel construction at 1800 RPM. MAS supplied inlet and outlet expansion joints.
- Installation 4
- Field installation of a 106" diameter AIRFOIL coal mine ventilation system fan, arrangement #3,with inlet box, SWSI, 720 RPM design. MAS manufactures and supplied the fan, back-draft damper, inlet damper and operator and inlet ductwork to mine the opening. The duct elbow includes an explosion vent door.
- Installation 5
- Field installation of a 25"diameter RADIAL BLADE fan used on a portable pilot plant scrubber for on site testing, arrangement #9, SWSI, 2000 RPM, 2000 CFM, 120°F design.
- Installation 6a - Installation 6b
- Field installation of twelve (12) fans
-
Four (4) 70" diameter RADIAL TIP fans, SWSI, arrangement #7, with inlet box, 1200 RPM, 104°F design. The units are 4 of 12 MAS fans used on a new fiberglass production line.
-
Two (2) 85" diameter RADIAL TIP fans, DWDI, arrangement #7, with inlet boxes, 600 RPM, 104°F design. The units have split 1/4" mild steel housings and supplied, cooper split bearings, vibration switches, and bearing RTDs.